Both plants clean used water, but they treat different things. An STP (sewage treatment plant) treats domestic wastewater from toilets, kitchens and bathrooms. An ETP (effluent treatment plant) treats wastewater from an industrial process.
| STP | ETP | |
|---|---|---|
| Water comes from | Toilets, kitchens, bathrooms | Manufacturing and process operations |
| Main pollutants | Organic matter (BOD), solids, germs | Depends on the industry: chemicals, oils, metals, colour, high COD |
| Typical stages | Screening, equalisation, biological treatment, settling, disinfection, polishing filters | Equalisation, pH correction, chemical dosing, settling, then biological treatment and polishing if needed |
| Treated water used for | Flushing, gardening, cooling make-up | Reuse in the process, or discharge within limits |
A factory with a canteen and toilets usually needs both: an ETP for the process water and an STP for the sewage, or one combined system designed for both. Housing societies, hotels and hospitals mainly need an STP.
To reuse water, the output is usually polished with filtration, activated carbon and disinfection such as UV, and sometimes RO. Discharge norms are set by the pollution control authorities, so confirm which norms apply to your site with your State Pollution Control Board.
Written by the Arukal Instruments team. Every plant and water source is different, so test your own water and ask us before you buy.
Sometimes. A combined system can be designed when the effluent is compatible, but process effluent often needs its own pre-treatment first.
No. Treated water from an ETP or STP is for reuse or discharge, not drinking, unless further treated and tested.
The pollution control authorities. Check with your State Pollution Control Board.