Borewell water that is clear in the glass but turns brown, leaves orange stains on tiles or tastes of metal usually has dissolved iron. Iron is not just a cosmetic problem: it stains laundry and fixtures, fouls softener resin, clogs pipes and can foul RO membranes. The BIS drinking water standard IS 10500 sets an acceptable limit of 0.3 mg/L for iron (check the latest edition of the standard).
The right treatment depends on the form of iron and on the rest of the water. Test at least iron, pH, total hardness, TDS and, if the water smells of rotten eggs, hydrogen sulphide. Manganese often comes with iron.
Raw borewell water, then aeration, then a pressure filter with iron-removal media, then activated carbon, and then softening or RO only if hardness or TDS also needs correcting. Take iron out before RO, because iron fouls membranes.
Backwash the filter on a schedule or by pressure drop, re-test the treated water regularly and replace media when performance falls. A multiport valve makes backwash simple, and an FRP vessel resists corrosion.
Written by the Arukal Instruments team. Every plant and water source is different, so test your own water and ask us before you buy.
The iron is dissolved when it comes out of the borewell and oxidises when it meets air, forming brown particles.
RO is not the right first step for iron. Iron can foul the membranes, so it is removed by oxidation and filtration before RO.
It depends on the iron level and flow. Many plants backwash by schedule or when the pressure drop across the filter rises. Your supplier's guidance for your media applies.