📞 +91-8538070869✉ info@arukalinstruments.in
Sales & service: West Bengal • Guwahati, Assam
Home / Products / Nano-Filtration Plant
High-pressure feedConcentrateSoftened permeateNF elementspiral-woundPressure vesselCaHardness blockedHardness, sulphate and colour are held back; some salts pass
Where the nano-filtration plant sitsRawwaterSand / carbonfilterCartridgefilterNFmembranesArukalTreatedwaterSoftens and removes colour at lower pressure than RO
NF skid capacity (m³/h)1NF 1small site5NF 5colour, hardness10NF 10industry25NF 25largem³/hCapacity depends on feed water and recovery

Swipe a diagram sideways to see all of it

Plants and systems

Nano-Filtration Plant

Selective membrane plants for hardness, colour and organics

SofteningColour removalOrganicsLower pressure

Partial desalination that removes hardness, colour and organics at lower pressure than RO. Select, supply and support from Arukal Instruments, serving India and Nepal.

80 – 98 %Hardness rejection
5 – 15 barOperating pressure
70 – 85 %Recovery
1 – 100 m³/hCapacity
Overview

What it does

Nano-filtration (NF) membranes sit between UF and RO. They hold back most hardness (calcium and magnesium), sulphate, colour and organics, but let a good part of the monovalent salts such as sodium chloride pass. This makes NF a softening and polishing step that needs less pressure and energy than RO.

Arukal supplies NF plants with membranes, pressure vessels, high-pressure pumps, instruments, cleaning system and controls. NF is used for softening without salt, colour removal, partial desalination and as a pre-treatment.

Where the nano-filtration plant sitsRawwaterSand / carbonfilterCartridgefilterNFmembranesArukalTreatedwaterSoftens and removes colour at lower pressure than RO
1

Pre-treatment

Filters, cartridge filtration and antiscalant protect the membrane.

2

Pressurise

A pump feeds water at 5 to 15 bar to the NF elements.

3

Selective separation

Water and most single-charged salts pass; hardness, sulphate and organics are held back.

4

Permeate and concentrate

Softened permeate is collected; the concentrate carries the rejected salts to drain or reuse.

Features & benefits

Why choose Arukal nano-filtration plants

Softening without salt

Removes hardness with no regenerant chemicals.

Colour and organics

Reduces colour, TOC and many organics.

Lower energy than RO

Operates at lower pressure, so pumping cost is lower.

Partial desalination

Keeps some minerals, which suits some drinking water uses.

Complete skid

Pump, vessels, instruments and cleaning system.

Selection support

We choose the element from your analysis.

Technical data

Specifications

Typical values. Values are typical for the product family and given for guidance. Exact figures depend on the make and model supplied; ask us for the data sheet of the specific model.

Plant (typical)

Membrane typeSpiral-wound polyamide thin-film composite NF element
Hardness rejection80 – 98 %
Sodium chloride rejection20 – 70 % (element dependent)
Operating pressure5 – 15 bar
Recovery70 – 85 %
Feed SDI< 5

Construction

Elements4040 and 8040 NF elements
VesselsFRP or SS pressure vessels
PumpMultistage centrifugal, SS 304 / 316
SkidMS powder-coated or SS frame with panel and instruments
Models

Typical plant sizes

ModelCapacityElementsTypical use
NF 11 m³/h2 × 4040Small site, lab
NF 55 m³/h3 – 4 × 8040Colour or hardness removal
NF 1010 m³/h6 – 8 × 8040Industrial softening
NF 2525 m³/h16 – 20 × 8040Large plants

Capacity depends on feed water, temperature and recovery. Ask us for a design.

NF skid capacity (m³/h)1NF 1small site5NF 5colour, hardness10NF 10industry25NF 25largem³/hCapacity depends on feed water and recovery
Selection guide

What we need to design your NF plant

  • Feed water analysis (TDS, hardness, sulphate, colour, TOC, iron, SDI)
  • Required permeate flow (m³/h) and hours of operation
  • What you need removed (hardness, colour, sulphate, organics)
  • Power and space available
Choosing by goalHardnessonlyno salt wantedNF plantColour, TOCtea-colouredwaterNF plantFulldesalinationhigh TDSRO plantParticles,bacteriano dissolvedremovalUF plantSend us your water analysis for a firm recommendation
Applications

Where it is used

Salt-free softening
Colour removal from groundwater
Dairy and food processing
Textile and dye effluent reuse
Sulphate reduction
Partial desalination
Handling & care

Installation, use and care

  1. 1

    Pre-treat

    Keep SDI low with filtration and dose antiscalant as designed.

  2. 2

    Monitor

    Record flow, pressure and conductivity to see fouling early.

  3. 3

    Clean

    Clean when flow falls or pressure drop rises by 10 – 15 %.

  4. 4

    Store

    Preserve idle elements with the right solution to keep them wet.

Downloads

Data sheet and brochure

FAQ

Frequently asked questions

NF or RO?

Choose NF if you need hardness, colour or organics removed and can keep some monovalent salts. Choose RO for full desalination.

Does NF remove TDS?

Partly. It removes most hardness and sulphate, but only some sodium chloride.

Do I still need a softener?

NF can replace a softener for many waters. Heavy iron or silica may still need pre-treatment.

How long do NF elements last?

Often 3 to 5 years with good pre-treatment and cleaning.

What pre-treatment do I need?

Sand and carbon filters, cartridge filters and antiscalant, as for RO.

Related products

Supplied across India — enquire from Guwahati, Assam & North-East, West Bengal or anywhere in India and Nepal.

Need help choosing the right water treatment solution?

Request a Quote →