๐Ÿ“ž +91-8538070869โœ‰ info@arukalinstruments.in
Sales & service: West Bengal • Guwahati, Assam
Home / Products / Dual Media Filter
Anthracitecoarse, lightFilter sand0.4 โ€“ 0.8 mmSupport gravel3 โ€“ 40 mmFeed inOutletCoarse anthracite over fine sand holds dirt deeper in the bed
Where the dual media filter sitsRawwaterFeedpumpDual mediafilterArukalCarbonfilterROmembranesAnthracite and sand: longer runs, higher flow
Dual media filter vessel sizes24 incommercial36 inindustry48 inRO feed72 inlargeAnthracite and sand together give longer runs

Swipe a diagram sideways to see all of it

Plants and systems

Dual Media Filter

Anthracite and sand filters for higher flow and longer runs

AnthraciteSandLonger runsPre-treatment

Two layers of media that filter deeper than plain sand. Select, supply and support from Arukal Instruments, serving India and Nepal.

Anthracite + sandMedia
10 โ€“ 12 m/hFiltration velocity
Down to 15 โ€“ 25 ยตmRemoves
0.5 โ€“ 100 mยณ/hCapacity
Overview

What it does

A dual media filter has a layer of light, coarse anthracite on top of fine, heavy sand. The coarse layer catches the larger particles and the sand catches the rest, so dirt is stored deeper in the bed and filter runs are longer than with sand alone.

Arukal supplies dual media filters with MS or FRP vessels, internals, anthracite, sand, gravel and valves, for pre-treatment of RO, DM and process water.

Where the dual media filter sitsRawwaterFeedpumpDual mediafilterArukalCarbonfilterROmembranesAnthracite and sand: longer runs, higher flow
1

Coarse layer

Anthracite on top holds the larger particles.

2

Fine layer

Sand below catches the finer particles.

3

Clean water out

Filtered water leaves through the lower collector.

4

Backwash

Backwash re-sorts the two layers and flushes the dirt.

Features & benefits

Why choose Arukal dual media filters

Deeper filtration

Dirt is stored through the bed, so runs are longer.

Higher flow than sand

More water per filter area for the same turbidity.

Lower backwash use

Fewer backwashes mean less wasted water.

Simple and rugged

Two media, standard vessel and valves.

Sized to flow

Vessel sized for a safe filtration velocity.

Media supply

Top-up and replacement media from Arukal.

Technical data

Specifications

Typical values. Values are typical for the product family and given for guidance. Exact figures depend on the make and model supplied; ask us for the data sheet of the specific model.

Filter (typical)

Filtration velocity10 โ€“ 12 m/h
Backwash velocityapprox. 35 โ€“ 40 m/h for 10 โ€“ 15 min
MediaAnthracite over silica sand on gravel support
Bed depthapprox. 700 โ€“ 1,000 mm
Particle removalapprox. 15 โ€“ 25 ยตm
Design pressureup to 6 bar

Media layers (top to bottom)

Anthracite0.8 โ€“ 1.6 mm, 300 โ€“ 400 mm
Filter sand0.4 โ€“ 0.8 mm, 300 โ€“ 400 mm
Gravel support3 โ€“ 40 mm, 200 โ€“ 300 mm
Models

Typical filter sizes

Vessel (dia ร— height)Flow at 11 m/hTotal mediaTypical use
24 ร— 72 inapprox. 3.2 mยณ/happrox. 230 LCommercial
36 ร— 72 inapprox. 7.5 mยณ/happrox. 520 LSmall industry
48 ร— 72 inapprox. 13 mยณ/happrox. 950 LIndustry, RO feed
72 ร— 72 inapprox. 29 mยณ/happrox. 2,200 LLarge plants

Flow shown at a typical filtration velocity of 11 m/h. Custom sizes on request.

Dual media filter vessel sizes24 incommercial36 inindustry48 inRO feed72 inlargeAnthracite and sand together give longer runs
Selection guide

What we need to size your dual media filter

  • Flow rate (mยณ/h) and hours of operation
  • Raw water turbidity and source
  • Manual or automatic backwash
  • Vessel material and pressure
Choosing by loadLightturbidityborewellSand filterModeratesolidscanal, tankwaterDual mediaHeavy solidsriver waterMulti mediaChlorineafterfiltrationCarbon filterSend us your flow and water analysis for a firm recommendation
Applications

Where it is used

RO and DM pre-treatment
Tank and canal water
Cooling water
Process water
Swimming pools
Reuse water
Handling & care

Installation, use and care

  1. 1

    Commission

    Layer media in order, backwash gently and run to waste until clear.

  2. 2

    Backwash

    Backwash on pressure drop or by timer.

  3. 3

    Inspect

    Check for mud balls, channelling and lost anthracite.

  4. 4

    Top up

    Top up media when the bed height drops.

Downloads

Data sheet and brochure

FAQ

Frequently asked questions

Dual media or sand filter?

Dual media gives longer runs and a higher flow rate for the same vessel. Sand is cheaper and simpler.

Why does anthracite stay on top?

It is lighter than sand, so backwash settles it above the sand.

How often should I backwash?

Typically daily or when the pressure drop rises by about 0.5 bar.

Can I convert my sand filter?

Often yes, if the vessel has enough freeboard. We can advise.

Do you supply the media?

Yes. See Filter Media.

Related products

Supplied across India — enquire from Guwahati, Assam & North-East, West Bengal or anywhere in India and Nepal.

Need help choosing the right water treatment solution?

Request a Quote โ†’