A water report is a list of numbers. This guide explains what the common ones mean and shows the limits in the BIS drinking water standard IS 10500:2012 (a newer edition may apply, so check the current standard).
| Parameter | Acceptable limit | Permissible limit if no other source |
|---|---|---|
| pH | 6.5 to 8.5 | No relaxation |
| TDS | 500 mg/L | 2000 mg/L |
| Total hardness (as CaCO3) | 200 mg/L | 600 mg/L |
| Iron | 0.3 mg/L | No relaxation |
| Chloride | 250 mg/L | 1000 mg/L |
| Fluoride | 1.0 mg/L | 1.5 mg/L |
| Arsenic | 0.01 mg/L | 0.05 mg/L |
| Nitrate | 45 mg/L | No relaxation |
| Turbidity | 1 NTU | 5 NTU |
| Free residual chlorine | 0.2 mg/L | 1.0 mg/L |
A pen-type meter gives quick pH, TDS and conductivity readings on site. A water testing kit checks several common parameters. Arsenic, fluoride and bacteria need a laboratory or a suitable specific kit, so do not rely on a pen meter for them.
Written by the Arukal Instruments team. Every plant and water source is different, so test your own water and ask us before you buy.
Not always. TDS says how much is dissolved, not what it is. Very low TDS water is not harmful in itself, but you should know why you want it.
No. It shows dissolved solids only. Safety also depends on things like bacteria, arsenic and fluoride, which need other tests.
At an accredited laboratory. Our team can advise on the next step after you have the report.