A water softener and a demineralisation (DM) plant both use ion exchange resin, so they are often confused. They solve different problems, and picking the wrong one wastes money.
A softener uses a cation resin in sodium form. It swaps the hardness ions, calcium and magnesium, for sodium. The water becomes soft and stops forming scale, but the total dissolved solids stay about the same. The resin is regenerated with common salt. Softeners protect boilers, heat exchangers and RO membranes from scale.
A DM plant passes water through a cation resin in hydrogen form and then an anion resin in hydroxide form, which removes nearly all dissolved ions. A mixed bed polishes the water further. The resins are regenerated with acid and caustic. The water has very low conductivity, which suits high-pressure boilers, pharma, labs and many processes.
| Softener | DM plant | |
|---|---|---|
| Removes | Hardness (calcium, magnesium) | Almost all dissolved ions |
| TDS after treatment | About the same | Very low |
| Regenerated with | Common salt | Acid and caustic |
| Typical use | Low-pressure boilers, cooling, laundry, RO pre-treatment | High-pressure boilers, pharma, process water, labs |
| Running cost | Lower | Higher |
Written by the Arukal Instruments team. Every plant and water source is different, so test your own water and ask us before you buy.
No. It exchanges hardness ions for sodium, so TDS stays about the same.
RO removes most dissolved salts but not all. Many plants use RO followed by a mixed bed to reach very low conductivity.
A low-pressure boiler is often fine on softened water. High-pressure boilers need demineralised water. Check your boiler maker's feed water limits.