📞 +91-8538070869✉ info@arukalinstruments.in
Sales & service: West Bengal • Guwahati, Assam
Home / Products / Activated Carbon Filter
Activated carbonadsorbs chlorineSupport gravel3 – 40 mmFeed inOutletChlorine and organics stick to the carbon granules
Where the activated carbon filter sitsRawwaterSandfilterCarbonfilterArukalCartridgefilterROmembranesRemoves chlorine before it can damage RO membranes
Activated carbon filter vessel sizes18 indomestic24 incommercial36 inindustry48 inRO feed72 inlargeSize the bed for contact time, not only for flow

Swipe a diagram sideways to see all of it

Plants and systems

Activated Carbon Filter

Remove chlorine, colour, odour and organics

DechlorinationColourOdourRO protection

Dechlorination and polishing filters that protect RO membranes and improve taste. Select, supply and support from Arukal Instruments, serving India and Nepal.

Chlorine, colour, odourRemoves
8 – 12 m/hFiltration velocity
Coconut or coalCarbon
0.5 – 100 m³/hCapacity
Overview

What it does

An activated carbon filter passes water through a bed of porous carbon granules. The carbon adsorbs chlorine, organic matter, colour, taste and odour. It is used ahead of RO, DM and softener plants and to improve drinking water.

Arukal supplies carbon filters with MS or FRP vessels, internals, activated carbon and valves, and the replacement carbon when the bed is spent.

Where the activated carbon filter sitsRawwaterSandfilterCarbonfilterArukalCartridgefilterROmembranesRemoves chlorine before it can damage RO membranes
1

Water enters

Pre-filtered water flows down through the carbon bed.

2

Adsorption

Chlorine and organics stick to the huge internal surface of the carbon.

3

Clean water out

Dechlorinated, clear, odour-free water leaves from the bottom.

4

Backwash

Regular backwash loosens the bed and removes fines.

Features & benefits

Why choose Arukal activated carbon filters

Protects RO membranes

Removes chlorine that would damage polyamide membranes.

Better taste and smell

Removes odour, colour and many organics.

Coconut or coal

Carbon type chosen for the duty.

Backwashable

Valve-operated backwash keeps the bed open.

Sized for contact time

Vessel sized for the contact time you need.

Carbon supply

Fresh carbon and servicing from Arukal.

Technical data

Specifications

Typical values. Values are typical for the product family and given for guidance. Exact figures depend on the make and model supplied; ask us for the data sheet of the specific model.

Filter (typical)

Filtration velocity8 – 12 m/h
Empty bed contact timeapprox. 5 – 10 minutes
CarbonGranular activated carbon (coconut shell or coal)
Iodine numberapprox. 800 – 1,000 mg/g
Bed depth600 – 1,000 mm
Chlorine removalFree chlorine below 0.1 mg/L at outlet (typical)

Construction

VesselMS rubber lined, epoxy-coated, SS, or FRP
InternalsUpper distributor, lower collector with fine strainers
ValvesMultiport or butterfly / diaphragm valves
Backwashapprox. 20 – 25 m/h for 10 min (gentle)
Models

Typical filter sizes

Vessel (dia × height)Flow at 10 m/hCarbon volumeTypical use
18 × 65 inapprox. 1.6 m³/happrox. 110 LDomestic, small commercial
24 × 72 inapprox. 3 m³/happrox. 200 LCommercial
36 × 72 inapprox. 7 m³/happrox. 450 LSmall industry
48 × 72 inapprox. 12 m³/happrox. 850 LIndustry, RO feed
72 × 72 inapprox. 27 m³/happrox. 2,000 LLarge plants

Carbon life depends on chlorine and organic load. Ask us to size the bed for your duty.

Activated carbon filter vessel sizes18 indomestic24 incommercial36 inindustry48 inRO feed72 inlargeSize the bed for contact time, not only for flow
Selection guide

What we need to size your carbon filter

  • Flow rate (m³/h) and hours of operation
  • Chlorine level and what you want removed (colour, odour, organics)
  • Manual or automatic backwash
  • Vessel material and pressure
Choosing by goalChlorineremovalbefore ROCarbon filterColour,odourdrinking waterCarbon filterOrganicssurface waterCarbon + UFTaste onlyfinal polishCarboncartridgeSend us your flow and water analysis for a firm recommendation
Applications

Where it is used

RO pre-treatment (dechlorination)
Municipal water polishing
Drinking water
Beverage and food lines
Colour and odour removal
Process water
Handling & care

Installation, use and care

  1. 1

    Wet the carbon

    Soak and backwash new carbon until the water runs clear of fines.

  2. 2

    Backwash gently

    Use a gentler backwash than sand to avoid losing carbon.

  3. 3

    Test chlorine

    Check outlet chlorine often. A rise means the carbon is spent.

  4. 4

    Replace

    Replace carbon when it stops removing chlorine or organics.

Downloads

Data sheet and brochure

FAQ

Frequently asked questions

How long does carbon last?

From months to a few years, depending on chlorine and organic load. Test the outlet to know.

Do I need carbon before RO?

Yes if the water has chlorine. Polyamide membranes are damaged by it.

Can carbon grow bacteria?

It can if left idle. Backwash regularly and consider UV after the filter.

Coconut or coal carbon?

Coconut carbon is harder and good for chlorine and taste. Coal carbon is a good general choice.

Can I reactivate carbon?

Usually it is replaced. Reactivation is possible at specialist plants.

Related products

Supplied across India — enquire from Guwahati, Assam & North-East, West Bengal or anywhere in India and Nepal.

Need help choosing the right water treatment solution?

Request a Quote →