📞 +91-8538070869✉ info@arukalinstruments.in
Sales & service: West Bengal • Guwahati, Assam
Home / Products / Dosing Pump
ChemicaltankDiaphragmSuction check valveStroke adjustTo water lineThe diaphragm moves back and forth to meter every dose
Where the dosing pump sitsRawwaterDosingpumpArukalFiltrationROmembranesChemicals are injected at the right point, in the right amount
Dosing pump flow range (LPH)10Smallantiscalant100Mediumboiler, pH400LargeETP, STP1,000X-largecoagulantup to LPHPick the pump by dose, flow and line pressure

Swipe a diagram sideways to see all of it

Industrial water treatment

Dosing Pump

Metering pumps for chemical dosing in water and wastewater plants

AntiscalantChlorinepH correctionCoagulant

Accurate chemical dosing for RO, boiler, cooling, effluent and disinfection duty. Select, supply and support from Arukal Instruments, serving India and Nepal.

1 – 1,000 LPHFlow range
up to 10 barMax pressure
Diaphragm meteringType
±2 % typicalAccuracy
Overview

What it does

A dosing pump meters a small, exact amount of chemical into a water line. It keeps antiscalant, chlorine, acid, alkali, coagulant and polymer at the right level, so the plant runs safely and you do not waste chemicals.

Arukal supplies solenoid and motor-driven diaphragm dosing pumps with tanks, mixers, injection quills and calibration columns. We help you size the pump for the dose and the line pressure, and set it up with the plant.

Where the dosing pump sitsRawwaterDosingpumpArukalFiltrationROmembranesChemicals are injected at the right point, in the right amount
1

Chemical is drawn in

The diaphragm moves back and the suction check valve draws chemical from the tank.

2

Diaphragm pushes

The diaphragm moves forward, closes the suction valve and pushes chemical out.

3

Injected into the line

The discharge check valve opens and the chemical enters the water line at the injection point.

4

Dose is set

Stroke length and stroke speed set the dose. A signal can change it with the flow.

Features & benefits

Why choose Arukal dosing pumps

Accurate dosing

Adjustable stroke length and speed for a steady, repeatable dose.

Chemical resistant

PVDF, PP and PTFE wetted parts for acids, alkalis and oxidisers.

Flow-proportional

Pulse or 4 – 20 mA input to dose in step with the water flow.

Many sizes

From laboratory pumps to plant duty, up to about 1,000 LPH.

Complete set

Tank, mixer, quill, foot valve and calibration column supplied together.

Easy upkeep

Simple diaphragm and valve replacement on site.

Technical data

Specifications

Typical values. Values are typical for the product family and given for guidance. Exact figures depend on the make and model supplied; ask us for the data sheet of the specific model.

Pump (typical)

TypeDiaphragm metering pump (solenoid or motor driven)
Flow range1 – 1,000 LPH (model dependent)
Maximum pressureup to 10 bar (higher on request)
Accuracy±2 % of set flow (typical)
Turndown ratio10:1 to 100:1
Power230 V single phase, 50 Hz (typical)
ControlManual, pulse input or 4 – 20 mA

Materials

Pump headPP, PVC or PVDF
DiaphragmPTFE-faced
Valve balls and seatsCeramic, SS 316 or PTFE
SealsViton / EPDM

Dosing set

Chemical tank50 to 1,000 L PE tank with lid
MixerOptional, motor-driven
AccessoriesFoot valve, injection quill, calibration column, pressure relief valve
Pump sizes

Typical pump sizes

SizeFlowPressureTypical use
Small1 – 10 LPHup to 10 barAntiscalant, small RO, lab
Medium10 – 100 LPHup to 7 barBoiler, cooling, pH control
Large100 – 400 LPHup to 5 barEffluent and sewage chemicals
Extra large400 – 1,000 LPHup to 3 barCoagulant and polymer dosing

Pressure falls as flow rises on motor-driven models. Final selection depends on dose and line pressure.

Dosing pump flow range (LPH)10Smallantiscalant100Mediumboiler, pH400LargeETP, STP1,000X-largecoagulantup to LPHPick the pump by dose, flow and line pressure
Selection guide

What we need to recommend the right dosing pump

  • Chemical to be dosed and its strength
  • Dose rate (mg/L) and water flow, or the flow needed in LPH
  • Line pressure at the injection point
  • Power supply and control signal available
Choosing by dutyROantiscalanttiny dose1 – 10 LPHBoiler,coolingsteady dose10 – 100 LPHETP, STPbulk chemicals100 – 400 LPHCoagulantlarge volumes400 – 1,000LPHSend us your dose and line pressure for a firm recommendation
Applications

Where it is used

RO antiscalant dosing
Boiler and cooling chemicals
Chlorine and hypochlorite dosing
pH correction
Coagulant and polymer dosing
ETP and STP chemicals
Handling & care

Installation, use and care

  1. 1

    Install

    Mount the pump below the chemical level where possible, with a foot valve and a pressure relief valve.

  2. 2

    Prime

    Prime with water first, then chemical, and check for air in the suction line.

  3. 3

    Calibrate

    Measure the real output with the calibration column and adjust the stroke.

  4. 4

    Service

    Replace the diaphragm and check valves once a year, or sooner for strong chemicals.

Downloads

Data sheet and brochure

FAQ

Frequently asked questions

How do I size a dosing pump?

Multiply the water flow by the dose to get the chemical needed per hour, then add margin. Tell us the numbers and we will size it.

Can one pump dose different chemicals?

Only if the materials suit them, and never at the same time. Use a pump for each chemical.

Why does my pump lose prime?

Usually air in the suction line, a dry check valve or gas from the chemical, such as hypochlorite. Fit a degassing head if needed.

Can it follow the water flow?

Yes. Pulse or 4 – 20 mA input lets the dose follow the flow.

Do you supply the tank and mixer?

Yes. We supply a complete dosing set.

Related products

Supplied across India — enquire from Guwahati, Assam & North-East, West Bengal or anywhere in India and Nepal.

Need help choosing the right water treatment solution?

Request a Quote →